Kombi 332CK Filling Pump

Benefits:

• Filling volume – 55 gr/zdih
• pressure 8-30 bar – Capable of filling also the lubrication system of the chains on the harvesters
• Leaves only a small amount of lubricant on top of the cap
• Support arms for additional anchoring with hose winding function
• Dust protection – protects the device and lubricant during transport
• 332S Lid is reinforced to withstand heavy loads
• possibility of connecting accessories via output no.2

Technical data:

Pressure: 8-30 bar
Quantity: approx. 55gr /zdvich

Output 1: Average inv. = 3/8″ and external 3/4″ hose connection

Output 2 : Average external connection= 3/8″

Inner hole diameter: 38 mm

 

Packaging: 2 meter 3/4″ hose (19mm internal), protective covers for filling couplings, lid, membrane with rubber edge, housing with sealing O-ring, screws

Optional: set of couplings and hoses, adapters for filling LS tubes and filling lubrication guns

Output 1 : can be completed with a set of hoses and couplings

Output 2 : can be supplemented with adapters for filling LS tubes and filling lubrication guns

 

Filling Pump + Lubrication gun = Lubrication without spills and smudges

Combine the lubrication system to your liking.

Various lubrication guns and pumps are offered.

Filling grease presses is often impractical, lubricant residues leak on presses and pumps, the contents of the reservoir are not used to 100% and the buckets are difficult to empty efficiently.

Lube-Tools is a complete filling
system that enables fast, easy, clean and more efficient filling than with other devices. Since at least 98% of the content canbe used, the handling is economical and environmentally friendly . In addition, the system
is applicable to all types of lubrication.

The system includes an improved pump, including a stable cover that prevents tipping over due to its design. The design of the grease press itself is also improved. The press and pump are connected by a quick coupling before filling.

The grease guns and pumps are equipped with a release valve that eliminates pumping problems, a return nipple for the lubrication hose and a reinforced lubrication piston. An indicator spring shows when the tube/press is full. A special cleaning tool is located in the pump handle.