GR10 Hydraulic Rotator

The Baltrotors GR10 hydraulic rotator
is the smallest rotator on the market. This is a very popular type of rotator, which is very often used by manufacturers of so-called small forwarders (forwarders for quads and mini-tractors) for their products. It is suitable for smaller hydraulic arms and cranes that lift loads up to 1 tonne in weight. This type of rotator is also very often used by customers in the domestic production of hydraulic arms and cranes (e.g. conversions from UNHZ 500 and UNHZ 750 loaders).

 

Basic technical specification

Rotation: Unlimited for both directions
Max. axial static load (load capacity): 10 kN (1,000 kg)
Max. dynamic axial load (rotational load capacity): 5 kN (500 kg)
Torque at 25 MPa: 450 Nm
Recommended oil flow: 10 l/min
Weight: 10 kg
Hydraulic connection thread: G 1/4
Maximum pressure for rotation: Max 25 MPa
Maximum pressure for closing the grab: Max 20 MPa
Maximum pressure to open the grapple: Max 30 MP

Top joint – length: 45 mm

Top joint – diameter: 25 mm

Lower shaft – diameter: 39.5mm

Lower shaft – bore diameter: 20mm